Central Tractor

TW96
TW120
TW144

Quality, Value and Dependability

The Rhino TW96, 120, and 144 are multi-spindle units that make short work of those larger mowing jobs and are ideal for pasture, maintenance, orchard applications, shredding stalks, or cutting material up to 2" in diameter.

Torque Dampeners - on both side drives help cushion sudden shockloads on the gearboxes and drivelines. Gearbox strength and durability are enhanced by the 1 3/4" splined shafts and tapered roller bearings. The gearboxes and drivelines are fully-shielded for added safety.

Slip Clutch - All TW's feature an easily-adjustable slip clutch and a CAT 4 driveline. The center gearbox is rated at 120 HP - among the highest in the industry for medium-duty cutters.

Mainframe - Rhino Quality and Toughness are built into every TW mainframe. The 10-gauge top deck is reinforced with formed channel bracing. The rolled-edge design adds both strength and eye appeal. The gearboxes and the tree-point hitch lugs are mounted to the frame, not the deck, to minimize downtime.

Optional Auxiliary Spindle Kit - available for the TW120 and TW144 pull-type units. The kit easily bolts into the axle arm beam for those applications where dual wheels are needed for added flotation and stability.

Featuring 29" (TW120) offset - with the driveline remaining straight, the TW96 and TW120 pull-type offsets are ideal for mowing in orchard applications or other hard-to reach areas. The extended reach under limbs is helpful for mowing grass or cutting prunings in orchards.

TW96

The TW96 cuts a 97" swath of material. The center gearbox is rated at 120 HP and the outboard gearboxes are rated at 90 HP. All the gearboxes feature 1 3/4" splined input shafts and tapered roller bearings for enhanced durability. The pull-type and semi-mount units require a 30 HP tractor (min.) and the lift-type unit requires a minimum of a 50 HP tractor (with adequate front weights). The TW96 is available with a CAT II, semi-mount hydraulic "Swing & Go" offset hitch for easy on-the-go adjustments. The adjustable hitch allows up to 12" of offset to the right for easier mowing under tree limbs and in and around obstacles.

TW120

The TW120 cuts a 120" swath of material. The center gearbox, rated at 120 HP, transfers power to the 100 HP outboard gearboxes. Torque dampeners on both sides of the center gearbox help minimize driveline and gearbox damage caused from sudden shockloads. Massive 2 3/8" diameter output shafts in the outboard gearboxes help provide optimum service. The pull-type and semi-mount units require a 50 HP (min.) tractor and the lift-type unity requires a 60 HP (min.) tractor (with adequate front weights).

TW144

The TW144 cuts a full 144" swath. The 120 HP center gearbox transfers power to the 100 HP outboard gearboxes. The pull-type and semi-mount units require a 55 HP tractor (min.) and the lift-type unit requires a 70 HP (min.) tractor (with adequate front weights).