Central Tractor

SE42, SE4, SE5, SE6, SE7

RHINO© SE Mowers...Providing Dependable Service at an Economical Price.

The Rhino-Servis SE family of economical single-spindle rotary mowers are rated for material up to 1" in diameter and are ideal for weed or grass mowing pasture clipping and cleaning up overgrown areas around the farm.

Slip Clutch Protection- is optional on the SE5 and SE6 lift-type units. Servis-Rhino offers a slip clutch driveline as standard equipment on the SE7 to minimize downtime. Easily adjustable, the slip clutch is designed to slip in case an obstruction is struck, reducing driveline and gearbox damage. Shear pin protection is standard on the SE42, SE4, and SE5 and SE6 pull-type units. Shear pins are optional on the SE5 and SE6 lift-type units.

Pan Blade Carrier- All SE mowers feature a pan blade carrier to help the unit glide over obstructions. Free swinging updraft blades are standard equipment to help assure a clean cut and reduce downtime.

Laminated Tailwheels - The laminated tailwheels on the SE mowers feature tapered roller bearings for added toughness. The wheel can be greased to reduce wear and extend the service life of the components. A molded tire is standard on the SE42 and SE4. The SE5 and SE6 are available with either a molded or laminated tire and wheel. A laminated tire and wheel is standard on the SE7. All lift-type tailwheels swivel a full 360 degrees to provide flotation in any direction.

SE42

The SE42 has a sturdy, compact design which helps to deliver a low cost method of mowing in confined area. Designed for use on 540 RPM, CAT I tractors with a minimum of 15 horsepower, the SE42 features a reinforced 11 gauge deck and a CAT 3 shear pin protected driveline for added durability. Free-swinging updraft blades mounted on a pan carrier and a blade tip speed of 11,459 FPM provide a clean cut. Front and rear safety deflectors, plus a shielded driveline and gearbox, are standard for greater operator safety.

SE4

The SE4 cuts a full 48" swath and is designed for tractors as small as 15 HP. Features include shear pin driveline protection, a 30 HP gearbox, a molded tire and wheel, and a blade tip speed of 13,097 FPM to provide a clean cut. The compact design of the SE4 makes it ideal for mowing in confined areas.

SE5

The SE 5 is available as a lift or pull-type unit and features a 65 HP gearbox, pan blade carrier, and blade tip speed of 12,469 FPM. The lift-type unit is available with either shear pin or slip clutch driveline protection. (Shear pin protection only on pull-type unit). Molded or laminated tires are available. The SE5 lift-type unit is designed for tractors with 20 - 40 HP and a standard CAT I three-point hitch. SE5 Pull-type shown on right.

SE6

The SE6 mower features a 65 HP gearbox providing a blade tip speed of 14,930 FPM for a cleaner cut. Either a shear pin or slip clutch driveline is available (shear pin only on pull-type unit) to help minimize drivetrain damage. A molded or laminated tailwheel is available to help reduce the chance of scalping on uneven terrain. The SE6 is designed for CAT I three-point lift tractors as small as 30 HP to provide dependable service at a reasonable price. The SE6 is also available as a pull-type unit.

SE7

The Rhino SE7 features a 75 HP gearbox to fit a wide range of CATII tractors. The Cat 4 driveline features slip clutch protection to help protect the drivetrain. A blade tip speed of 14,024 FPM helps assure a clean cut. A laminated tailwheel is standard to help prevent scalping and downtime. Rated for tractors of at least 45 HP, the SE7 provides a wide cut and economical operation.