| Every
Rhino Post Hole Digger gearbox features proven dependability
and a five-year warranty (3 year, EPHD). Designed and constructed
for years of service, the regular-duty EPHD features a 45 lb.
gearbox, while the RPHD and the heavy-duty HPHD feature gear
boxes that weigh approximately 84 lbs. The super-heavy-duty
SPHD, designed for use in commercial, industrial, or other extreme
applications, features a massive gearbox weighing approximately
108 lbs. |
| The HPHD
and SPHD models feature reversible CAT I-II hitch pins allowing
attachment to a wider range of tractors. The EPHD and RPHD are
designed for use on CAT I tractors only. |
|
Available only for the SPHD, the optional Rhino down pressure
kit can exert an extra 500 lbs of down pressure to aid in the
digging process in demanding conditions. Easy to install, the
cylinder works off of tractor hydraulics and requires only one
set of hydraulic outlets. In commercial, industrial, or other
demanding applications, the down pressure kit can save you time
and labor. |
|
RPHD
The
SE42 has a sturdy, compact design which helps to deliver a
low cost method of mowing in confined area. Designed for use
on 540 RPM, CAT I tractors with a minimum of 15 horsepower,
the SE42 features a reinforced 11 gauge deck and a CAT 3 shear
pin protected driveline for added durability. Free-swinging
updraft blades mounted on a pan carrier and a blade tip speed
of 11,459 FPM provide a clean cut. Front and rear safety deflectors,
plus a shielded driveline and gearbox, are standard for greater
operator safety.
|
HPHD
The
SE4 cuts a full 48" swath and is designed for tractors
as small as 15 HP.
Features
include shear pin driveline protection, a 30 HP gearbox,
a molded tire and wheel, and a blade tip speed of 13,097
FPM to provide a clean cut.
The
compact design of the SE4 makes it ideal for mowing in confined
areas.
|
|
SPHD
The
SE 5 is available as a lift or pull-type unit and features
a 65 HP gearbox, pan blade carrier, and blade tip speed of
12,469 FPM. The lift-type unit is available with either shear
pin or slip clutch driveline protection. (Shear pin protection
only on pull-type unit). Molded or laminated tires are available.
The SE5 lift-type unit is designed for tractors with 20 -
40 HP and a standard CAT I three-point hitch. SE5 Pull-type
shown on right.
|
EPHD
The
EPHD is designed for use on CAT I tractors up to 30 horsepower.
Features include shear bolt driveline protection, a three-year
limited gearbox warranty, and a choice of a 6", 9",
or 12" auger to provide dependable service in a range
of applications.
A
fully shielded gearbox and driveline are standard for greater
safety.
|
|
EPHD,RPHD, HPHD, SPHD