|
|
INTELLI-SHIFT TRANSMISSION WITH AUTO-MODE
For
maximum versatility, the 16F/16R Intelli-Shift transmission features
an 8-speed dual-range powershift with 16 gears in each forward and
reverse. A single lever operates the range shift, while two buttons
control upshift/downshift are also at the touch of a button.
|
|
Light
soil
To maintain optimum working speed in the least demanding terrain,
the transmission stays in your preset gear, for example 4th. |
Heavy
soil
For working in heavy soil, the transmission automatically
downshifts to 3rd gear, then to 2nd, and 1st if required.
When the terrain changes to light soil, the transmission automatically
shifts back up to 4th. |
Uphill
To power up an incline, the transmission automatically downshifts
up to 3 speeds after sensing an increase in engine load by
dropping the rpm. |
Downhill
when the crest of a hill has been reached, the transmission
will automatically upshift in order to regain optimum working
speed. |
LARGE
IMAGE OF TRANSMISSION
|
|
AUTO-MODE
A
feature that enables the M105X and M125X to automatically
shift in a range of a maximum 4 gears (selected or preset
working gear and 3 up or downshifts) to maximize performance
when your load or terrain changes. The sensitivity dials let
you achieve quick and precise power response by changing the
engines rpm at which the auto-mode shift point is set; it
can also be adjusted on the go to maximize auto-mode productivity.
The auto-mode
switch has three positions - travel mode on top, field mode
on the bottom, and off in the middle. When either mode is
activated, a green indicator light is illuminated on the dash.
If auto-mode is not in use, set the switch to the middle off
position and the indicator light will go off.
|
 |
|
|
PLUSH
COMFORT
To
ensure superior comfort, Kubota designers made in an all-out effort
when creating the M-Series cab. Features include operating controls
in the right armrest, newly designed AC system, wide unobstructed
view, corner-post exhaust pipe, deluxe air-ride seat and more.
|
|
|
CONTROL
CONSOLE
User-friendly
and ergonomically correct, the newly designed control console concentrates
all operating controls and switches to your right-hand side– putting
everything you need within easy reach. Everything is easy to see,
easy to reach, and easy to use – making you more productive.
|
 |
BI-SPEED
TURN
When
the front wheels exceed a turning angle of about 35°, Kubota’s
Bi-Speed Turns the front wheels at a rate of speed nearly
twice that of the rear wheels. The result is a smoother, tighter
turn, allowing you to turn into rows on your first attempt,
or to easily maneuver around live-stock yards or buildings.
The standard 4WD mode can be selected separately, or select
Bi-Speed for the ultimate turn and of course when the switch
is off, the 2WD mode is selected.
|
|
|
|
|
|
HYDRAULIC
SYSTEM
For smooth
implement handling and for extra speed for front loader/rear implement
operations, both M-Series tractors come with gear-type hydraulic
pumps. For higher efficiency, a regulator valve and low pressure
oil cooler keeps hydraulic temperature low to maintain optimum oil
temperature. The hydraulic pumps are located on top of the transmission
to increase oil flow efficiency.
|
 |
|
ELECTRO-HYDRAULIC
DIFFERENTIAL LOCKS
Getting
bogged down in the mud will no longer slow you down with this
feature. Simply engage the electro-hydraulic differential
locks on both front and rear wheels to achieve positive traction—and
you’re up and out and back on the job.
|
|
|
SLANTED
FULL-OPEN HOOD
The single
piece slanted hood increases visibility, and the deluxe headlights
illuminate night work. Plus, the hood’s dual gas shock assist allows
it to open easily, simplifying engine maintenance.
|
 |
|
|
|
ROUNDED
OVER-SIZED FENDERS
Made
from ultra-durable FRP fiberglass, our large, rounded fenders
provide increased protection from mud, dirt, dust, and other
flying debris, while giving the M105X and M125X a more streamlined
look.
|
|
|
DIGITAL
LCD PANEL
Another new
feature, the digital LCD panel gives you precise control of your
fieldwork, such as when spraying, by indicating travel speed and
PTO rpm. It’s conveniently located to your right-hand side. For
a quick, easy glance.
|
|
 |
|
WIDE
UNOBSTRUCTED VIEW
We improved
visibility by increasing the glass area around the frameless
doors and by concealing the pillars. Bottom-hinged windshield
wiper enhances visibility by lower glass area, right up to
the front tires.
|
|
|
|
OPERATING
CONTROLS IN THE RIGHT ARM REST
The right side
armrest incorporates the three-point hitch controls that include
- the manual lift control, the electronic one-touch lift and lower
button, and a set of transmission shift buttons. Unparalleled comfort
is our target.
|
|
|
|
|
DELUXE
AIR-RIDE SEAT
Equipped
with an adjustable air-ride seat suspension system, contoured,
and generously padded, you’ll ride comfortably all day. Additionally,
the seat swivels 15 degree’s right to increase operation visibility
in the field and 30 degree’s to the left for easy entry and
expiating. One more feature you’ll appreciate is the knee
action attenuator for a smoother ride in the field.
|
|
|
WIDE
REAR VIEW
To help you
perform jobs more efficiently and safely, the lower rear panel has
been replaced with glass. Now, you’ll always have a clear view of
what’s going on behind you.
|
|
|
|
|
|
NEWLY
DESIGNED AC SYSTEM
Whether
the hottest day or the chilliest evening, our powerful air
conditioner with adjustable air ducts that blow closer to
your head will keep you comfortable in either climate.
|
|
|
RADIO-CASSETTTE
OR RADIO-CD WITH
WEATHER BAND (OPTIONAL)
A predesignated
space makes installing the optional radio-cassette or radio-CD with
weather band a snap. There’s no need to remove either the outer
or inner roof. Plus, the speakers, antenna, and wire harness are
pre-installed.
|
|
|
|
|
CORNER-POST
EXHAUST PIPE
No
longer located in the middle of the hood, the repositioned
corner-post exhaust pipe lets you get a clear, unobstructed
view of what’s up ahead.
|
|
|
BEVEL-GEAR
FRONT AXLE
Another Kubota
exclusive, the bevel-gear front-wheel drive system that enables
the M105X and M125X to achieve a tighter turning radius there’s
no U-Joints. Generous 50 degree turning angle, enables easier handling
of both tractors in varying conditions. The Bevel Gear design has
all components hermetically sealed in oil.
|
|
|
|
|
HIGH
CROP CLEARANCE
To offer
the highest crop clearance in their class, the front axle
propeller shaft passes through the engine oil pan to provide
ample clearance.
|
|
|
LIVE-INDEPENDENT
HYDRAULIC PTO
No matter what
kind of work you need to do, you've got the power to operate a variety
of rear-mounted implements with Kubota's dual-speed PTO. There are
two PTO shafts - a standard 540 rpm and a 1,000 rpm, 21 spline shaft.
They are easily changed using pliers to remove the snap ring. To
further increase productivity, our independent PTO can be engaged
and disengaged with a simple push and turn right for on, and push
it in to turn it off. Automatic modulation provides smooth engagement
without stopping the tractor.
|
|
|
|
|
HEAVY
DUTY DRAWBAR
Ultra-durable
and ultra-tough, the super sturdy drawbar bracket can handle
the roughest hauling jobs, such as pulling heavy trailers
(a drop-drawbar is optional on the M105X).
|
|
|
HYDRAULIC
FLOW VALVES AND AUXILIARY CONTROL VALVE
To ensure faster
loader cycle times and instantaneous implement response, both M-Series
tractors have high-flow, 18.1 gpm (M105X) and 20.0 gpm (M125X) hydraulic
valves. The optional flow control valve also provides simultaneous
operation of the 3-point hitch and a remote valve, or two remote
valves. Adjustment of hydraulic flow from 0 to maximum is also possible.
Two remote valves come standard on the M105X and M125X tractors-a
SCD/Self-Canceling Detent and FD/Float-type valve. The maximum installation
is 4 valves (3 valves with a flow control valve).
|
|
|
|
|
QUICK
IMPLEMENT HOOKUP
Telescopic
lower link ends of the category II 3-point hitch permit fast
and easy implement attachment. Telescopic stabilizers, turn
buckle, right-lift rod, and the left fender-mounted remote
hitch switch also make hookup a snap.
|
|
| |
|
TRAILER
COUPLER
A
7-pin outlet is standard for use with a trailer or additional
implements.
|
|
 |
|
|
|
WRAP-AROUND
FRONT GRILL
By
allowing a high a volume of air to flow in, the engine stays
cooler. At the same time, with a drop in airflow velocity,
and incorporating the viscous fan drive* that runs only when
needed, les grass gets pulled into the grill. The grill can
also be cleaned in a flash. (*On the M125X only.)
|
|
|
REMOVALBE
SEAT PANEL
Need to access
the hydraulic valves or sensor-related components? Simply remove
the seat panel, and they’re right there in front of you. It doesn’t
get any easier.
|
|
|
|
|
EASIER
CLEANING
For
fast cleaning, the sliding, louver less-type AC condenser
can be removed in a snap. Its flat surface also makes cleaning
easier.
|
|
|
SINGLE-LEVER
CONTROLS
Fatigue reducing
and very efficient, our single-lever joystick control greatly simplifies
front loader operation so you can concentrate more on the work ahead.
The Series Circuit makes possible simultaneous boom and bucket operation
while the Regenerative Bucket Dump Circuit enables quick dumping
for efficient operation with quick cycle times. The loader has its
own value, never interfering with rear remote activity.
|
|
|
|
|
TILT
STEERING
Both
the M105X and the M125X Models feature as standard equipment
a foot operated tilt steering wheel.
|
|
|
FENDER
MOUNTED HITCH SWITCH
The
fender mounted switch simplifies connecting implements if
the hitch requires a slight movement to align pins.
|
 |
|
|
